Specification
Sample ladder program: Simplifies integration for quick and easy project start-up
FDT configuration software and communication DTM included: Module DTM will configure master module and network slave devices. The DTM can be used in many FDT compatible software containers
Supports CIP ladder logic messaging: Request diagnostic, status and slave data based on ladder events. Offer better cyclic data performance
PROFIBUS certified: Recognized quality certification mark
Loop resistance: 110 Ohm/km
Capacity: < 30 pF/m
Specification: Description
3000: 100 m / 325 ft
Impedance: 135 to 65 Ohm
1500: 200 m / 650 ft
Baud rate in kBit/s: Max. Distance
Acyclic Data: DPV1
6000: 100 m / 325 ft
187.5: 1,000 m / 3280 ft
93.75: 1,200 m / 4000 ft
Parameter: Value
Wire gauge: 0.64 mm
12000: 100 m / 325 ft
Output data: Maximum 480 Bytes (*)
Input/Output: Maximum 244 Bytes per Slave
Command data: 16 Bytes
9.6: 1,200 m / 4000 ft
DPV1 services: Read / Write class 1, Alarm
500: 400 m / 1300 ft
Services: Global-Control, Slave-Diag, Set-Parameter
Input Data: Maximum 408 Bytes (*)
Sync, Freeze Command: Supported
19.2: 1,200 m / 4000 ft
Status data: 88 Bytes
Slaves: Maximum 125
The PS69 PROFIBUS DP Master module expands the functionality of ’s CompactLogix / MicroLogix family of processors to include PROFIBUS. This module supports both I/O control and messaging, thus integrating DPV0 and DPV1 functionality into CompactLogix / MicroLogix. The PS69-DPM is a CompactLogix / MicroLogix compatible, PROFIBUS certified module, which enables controllers to communicate with a PROFIBUS network. The configuration and diagnostic of the PROFIBUS system is done via the serial diagnostic interface of the module using the System Configuration tool . The data exchange between controller and module is done via the I/O process data image using CompactLogix / MicroLogix backplane technology.
