**Ethernet Port**: 10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz
to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950:
1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-
per-second and less than or equal to 5 minutes duration
**Dimensions**
**(Height x Width x Depth)**: Standard: 5.38 in x 1.99 in x 4.38 in
(13.67 cm x 5.05 cm x 11.13 cm)
**Relative Humidity**: 5% to 95% RH with no condensation
**Vibration**: IEC 60068-2-6; 5G @ 10Hz to 150Hz
**Shock**: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
**Storage Temperature**: -40°C to 80°C (-40°F to 176°F )
**Operating Temperature**: -25°C to 70°C (-13°F to 158°F )
**Current Load**: 24 Vdc @ 300mA nominal
10 to 36 Vdc @ 610mA maximum
**Power Supply**: 24 Vdc nominal
10Vdc to 36 Vdc allowed
Positive, Negative, GND Terminals
**LED Indicators**: Configuration (CFG) and Error (ERR) Communication Status
Power (PWR) and Hardware Fault (FLT)
Network Status (NS) EtherNet/IP™ Class I or Class III Connection Status
(EtherNet/IP Only)
Module Status (MS) Module Configuration Status
(EtherNet/IP Only)
Ethernet Communication Port Link/Activity and 100mbit
Serial Communication Port Receive (RX) and Transmit (TX)
**Serial Port(S)**: Note: The number of serial communication ports depends on the gateway type,
and the combination of protocols.
**Serial Port Isolation**: 2500 Vrms port signal isolation per UL 1577
serial port communication signal uses RF(Radio Frequency) modulation signal as
isolation media, IC chip model is SiliconLabs Si844x(Si8440,Si8441,Si8442).
**Shipped With Each Unit**: 2.5 mm screwdriver
PLX30 DVD
J180 Power Connector
(1 to 4) RJ45-DB9M Serial Adapter Cable (serial protocol only)
(1 to 4) DB9 to Screw Terminal Adapter (serial protocol only)
5’ straight-through Ethernet cable (Grey)
ProSoft Technology’s Modbus® TCP/IP to Siemens Industrial Ethernet gateway allows high-speed bi-directional data transfers between Modbus® TCP/IP controllers and Siemens® S7-400, S7-300, S7-200 and S7-1200 PACs. In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
