**Ethernet Port**: 10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz
to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950:
1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-
per-second and less than or equal to 5 minutes duration
**LED Indicators**: Configuration (CFG) and Error (ERR) Communication Status
Power (PWR) and Hardware Fault (FLT)
Network Status (NS) EtherNet/IP™ Class I or Class III Connection Status
(EtherNet/IP Only)
Module Status (MS) Module Configuration Status
(EtherNet/IP Only)
Ethernet Communication Port Link/Activity and 100mbit
Serial Communication Port Receive (RX) and Transmit (TX)
**Dimensions**
**(Height x Width x Depth)**: Standard: 5.38 in x 1.99 in x 4.38 in
(13.67 cm x 5.05 cm x 11.13 cm)
**Relative Humidity**: 5% to 95% RH with no condensation
**Serial Port(S)**: Note: The number of serial communication ports depends on the gateway type,
and the combination of protocols.
**Vibration**: IEC 60068-2-6; 5G @ 10Hz to 150Hz
**Shock**: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
**Storage Temperature**: -40°C to 80°C (-40°F to 176°F )
**Operating Temperature**: -25°C to 70°C (-13°F to 158°F )
**Current Load**: 24 Vdc @ 300mA nominal
10 to 36 Vdc @ 610mA maximum
**Power Supply**: 24 Vdc nominal
10Vdc to 36 Vdc allowed
Positive, Negative, GND Terminals
**Shipped With Each Unit**: 2.5 mm screwdriver
PLX30 DVD
J180 Power Connector
(1 to 4) RJ45-DB9M Serial Adapter Cable (serial protocol only)
(1 to 4) DB9 to Screw Terminal Adapter (serial protocol only)
5’ straight-through Ethernet cable (Grey)
**Serial Port Isolation**: 2500 Vrms port signal isolation per UL 1577
serial port communication signal uses RF(Radio Frequency) modulation signal as
isolation media, IC chip model is SiliconLabs Si844x(Si8440,Si8441,Si8442).
Special Features: 4000 Word database; Multiple I/O Connections; Status data; Node Health; 10/100 Mb Ethernet port with Auto Cable Crossover Detection; Data Analyzer for ASCII Network
Standard: ATEX, CE/EMC, CB Safety, Environmental, UL, Korea-KCC
Ethernet: 10Base-T
Brand Name: PROSOFT
Sub Brand: PL30
Type: Stand-alone Gateway
Our Modbus TCP/IP communication gateways offer bidirectional data transfers between devices on dissimilar networks. Our Modbus TCP/IP Driver uses Multiple Clients and Servers for faster data throughput. Protocol conversion gateways are the ideal solution for distributed networks when adding a remote rack becomes too costly. The PLX30s are stand-alone DIN-rail mounted gateways that provide one Ethernet port for communication, remote configuration and diagnostics, and up to four (4) serial communication ports. The PLX30 gateways also come with an SD Card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways contain a 4000 word database, includes a wide input power range (10 Vdc – 36 Vdc), and an extended temperature range (-25°C to 70°C). The PLX30 gateways include all the necessary cables required for communication.
