**Ethernet Port**: 10/100 Base-T half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50
Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC
60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000
[ARP] frames-per-second and less than or equal to 5 minutes duration
**LED Indicators**: Configuration (CFG) and Error (ERR) Communication Status
Power (PWR) and Hardware Fault (FLT)
Network Status (NS) EtherNet/IP Class I or Class III Connection Status
Module Status (MS) Module Configuration Status
Ethernet Communication Port Link/Activity and 100mbit
Serial Communication Port Receive (RX) and Transmit (TX)
**Serial Port Isolation**: 2500 Vrms port signal isolation per UL 1577 serial port communication signal
uses RF(Radio Frequency) modulation signal as isolation media, IC chip model
is SiliconLabs Si844x(Si8440,Si8441,Si8442).
**Shipped With Each Unit**: 2.5 mm screwdriver, PLX30 DVD, J180 Power Connector,
(1 to 4) RJ45-DB9M Serial Adapter Cable (serial protocol),
(1 to 4) DB9 to Screw Terminal Adapter (serial protocol),
5’ straight-through Ethernet cable (grey)
**Shock**: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
**Vibration**: IEC 60068-2-6; 5G @ 10Hz to 150Hz
**Dimensions**
**(Height x Width x Depth)**: Standard: 5.38 in x 1.99 in x 4.38 in
(13.67 cm x 5.05 cm x 11.13 cm)
**Serial Ports**: 4
**Current Load**: 24 Vdc nominal @ 300mA
10 to 36 Vdc @ 610mA maximum
**Operating Temperature**: -25°C to 70°C (-13°F to 158°F )
**Storage Temperature**: -40°C to 80°C (-40°F to 176°F )
**Relative Humidity**: 5% to 95% RH with no condensation
**Power Supply**: 24 Vdc nominal
10Vdc to 36 Vdc allowed
Positive, Negative, GND Terminals
Brand Name: PROSOFT
Sub Brand: PL30
Type: Stand-alone Gateway
Special Features: 4000 Word database; Multiple I/O Connections; Status data; Node Health; 10/100 Mb Ethernet port with Auto Cable Crossover Detection; Data Analyzer for ASCII Network
Standard: ATEX, CE/EMC, CB Safety, Environmental, UL, Korea-KCC
Ethernet: 10Base-T
The EtherNet/IP® to Modbus Serial gateway offers bi-directional data transfers between Modbus Serial and the EtherNet/IP network. Our EtherNet/IP Driver uses Class 1 I/O connections and/or Class 3 Message instructions. Protocol conversion gateways are the ideal solution for distributed networks when adding a remote rack becomes too costly. The PLX31-EIP-MBS4 gateways are stand-alone DIN-rail mounted gateways that provide one Ethernet port for communication, allowing for remote configuration and diagnostics, and up to four (4) serial communication ports. The PLX30 gateways also come with an SD Card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways also come with a wide input power range (10 Vdc – 36 Vdc), and an extended temperature range (-25°C to 70°C ). The PLX30 gateways include all the necessary cables required for communication.
