**Power Supply**: 24 Vdc nominal
10Vdc to 36 Vdc allowed
Positive, Negative, GND Terminals
**Current Load**: 24 Vdc nominal @ 300mA
10 to 36 Vdc @ 610mA maximum
**Operating Temperature**: -25°C to 70°C (-13°F to 158°F )
**Storage Temperature**: -40°C to 80°C (-40°F to 176°F )
**Relative Humidity**: 5% to 95% RH with no condensation
**Serial Port(S)**: Note: The number of serial communication ports depends on the gateway type,
and the combination of protocols.
**Serial Port Isolation**: 2500 Vrms port signal isolation per UL 1577 serial port communication signal
uses RF(Radio Frequency) modulation signal as isolation media, IC chip model
is SiliconLabs Si844x(Si8440,Si8441,Si8442).
**LED Indicators**: Configuration (CFG) and Error (ERR) Communication Status
Power (PWR) and Hardware Fault (FLT)
Network Status (NS) EtherNet/IP Class I or Class III Connection Status
Module Status (MS) Module Configuration Status
Ethernet Communication Port Link/Activity and 100mbit
Serial Communication Port Receive (RX) and Transmit (TX)
**Shipped With Each Unit**: 2.5 mm screwdriver, PLX30 DVD, J180 Power Connector,
(1 to 4) RJ45-DB9M Serial Adapter Cable (serial protocol),
(1 to 4) DB9 to Screw Terminal Adapter (serial protocol),
5’ straight-through Ethernet cable (grey)
**Shock**: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
**Vibration**: IEC 60068-2-6; 5G @ 10Hz to 150Hz
**Dimensions**
**(Height x Width x Depth)**: Standard: 5.38 in x 1.99 in x 4.38 in
(13.67 cm x 5.05 cm x 11.13 cm)
**Ethernet Port**: 10/100 Base-T half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50
Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC
60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000
[ARP] frames-per-second and less than or equal to 5 minutes duration
Special Features: 4000 Word database; Multiple I/O Connections; Status data; Node Health; 10/100 Mb Ethernet port with Auto Cable Crossover Detection; Data Analyzer for ASCII Network
Standard: ATEX, CE/EMC, CB Safety, Environmental, UL, Korea-KCC
Ethernet: 10Base-T
Brand Name: PROSOFT
Sub Brand: PL30
Type: Stand-alone Gateway
ProSoft Technology’s EtherNet/IP™ to Modbus® Serial communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™ PACs or devices and Modbus®-enabled PACs or devices. EtherNet/IP™ PACs include Rockwell Automation® ControlLogix® and CompactLogix™, as well as several Schneider Electric® controllers. Modbus® Serial devices are widely used in nearly every industry and include SCADA systems and Power Monitors. The gateway includes several features that allow for simplified integration, reduced commissioning time and optimized performance
