**LED Indicators**: Configuration (CFG) and Error (ERR) Communication Status
Power (PWR) and Hardware Fault (FLT)
Network Status (NS) EtherNet/IP Class I or Class III Connection Status
Module Status (MS) Module Configuration Status
Ethernet Communication Port Link/Activity and 100mbit
Serial Communication Port Receive (RX) and Transmit (TX)
**Serial Port(S)**: Note: The number of serial communication ports depends on the gateway type,
and the combination of protocols.
**Serial Port Isolation**: 2500 Vrms port signal isolation per UL 1577 serial port communication signal
uses RF(Radio Frequency) modulation signal as isolation media, IC chip model
is SiliconLabs Si844x(Si8440,Si8441,Si8442).
**Shipped With Each Unit**: 2.5 mm screwdriver, PLX30 DVD, J180 Power Connector,
(1 to 4) RJ45-DB9M Serial Adapter Cable (serial protocol),
(1 to 4) DB9 to Screw Terminal Adapter (serial protocol),
5’ straight-through Ethernet cable (grey)
**Dimensions**
**(Height x Width x Depth)**: Standard: 5.38 in x 1.99 in x 4.38 in
(13.67 cm x 5.05 cm x 11.13 cm)
**Ethernet Port**: 10/100 Base-T half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50
Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC
60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000
[ARP] frames-per-second and less than or equal to 5 minutes duration
**Power Supply**: 24 Vdc nominal
10Vdc to 36 Vdc allowed
Positive, Negative, GND Terminals
**Storage Temperature**: -40°C to 80°C (-40°F to 176°F )
**Shock**: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
**Relative Humidity**: 5% to 95% RH with no condensation
**Operating Temperature**: -25°C to 70°C (-13°F to 158°F )
**Current Load**: 24 Vdc nominal @ 300mA
10 to 36 Vdc @ 610mA maximum
**Vibration**: IEC 60068-2-6; 5G @ 10Hz to 150Hz
Standard: ATEX, CE/EMC, CB Safety, Environmental, UL, Korea-KCC
Ethernet: 10Base-T
Brand Name: PROSOFT
Sub Brand: PL30
Type: Stand-alone Gateway
Special Features: 4000 Word database; Multiple I/O Connections; Status data; Node Health; 10/100 Mb Ethernet port with Auto Cable Crossover Detection; Data Analyzer for ASCII Network
ProSoft Technology’s EtherNet/IP™ to ASCII communication gateway allows highspeed bi-directional data transfers between EtherNet/IP™-enabled PACs and ASCII devices such as weigh scales and barcode readers. The EtherNet/IP™ protocol driver supports the explicit messaging implementation. The gateway is user-configurable as both a client and a server. EtherNet/IP™ PACs include Rockwell Automation® ControlLogix® and CompactLogix™, as well as several Schneider Electric® controllers. Applications for this module are found in most industries, especially manufacturing, oil & gas, electrical power and food processing. The gateway has several features that allow for simplified integration, reduced commissioning time and optimized performance.
