Processor: Compatible with Rockwell Automation SLC 5/02 M0/M1 capable processors or newer
Ethernet Port (Ethernet modules): RJ45 Connector
Link and activity LED indicators
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 seconds, applied as
specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-
per-second and less than or equal to 5 minutes duration
Relative Humidity: 5% to 95% (without condensation)
Shock: 30 g operational, 50 g non-operational
Vibration: 5 g from 10 to 150 Hz
LED Indicators: Module status, Backplane transfer status, Application status, Serial activity
(debug port), Ethernet link and activity, and error LED status
CFG Port (CFG): RJ45 (DB-9M with supplied cable)
RS-232 only
No hardware handshaking
Configuration Connector: RJ45 RS‑232 Connector (RJ45 to DB-9 cable shipped with unit)
BackPlane Current Load: 800 mA @ 5.1 VDC
Operating Temperature: 32° F to 140° F (0° C to 60° C)
Storage Temperature: -40° F to 185° F (-40° C to 85° C)
Special Features: Acts as an input/output module between the IEC-870-5-104 Ethernet network and the SLC backplane. Data transfer between the module and the processor is asynchronous from the actions on the network. databases are defined by the user for themodule to hold data as required by the protocol. Single Slot – 1746 backplane compatible (Local or extended I/O rack only. Remote rack not supported). The module is recognized as an Input/Output module and has access to processor memory for data transfer between processor and module using M0/M1 files. Ladder Logic is used for data transfer between module and processor. Sample ladder file includedConfiguration data obtained from configuration text file downloaded to module.
Application: Power and Distribution, Petrochemical, Water treatment, Oil and Gas Production
Standard: CE Mark; GOST-R; Korean KC Registration; UL/cUL; Class1. Div 2; UL/cUL; Class1, Div 2
_Ethernet: 10/100 Base-T
Brand Name: PROSOFT
Sub Brand: MV46
Type: Communication Module
The MVI46 IEC 60870-5-104 Server Network Interface Module allows SLC processors to interface easily with IEC 60870-5-104 protocol-compatible hosts. The MVI46-104S module has been designed to address applications where a device using the IEC 60870-5-104 protocol needs to communicate with a SLC processor. Functionality of the IEC protocol is very similar to the DNP 3.0 protocol which features time stamping and True Report by Exception (TRBE). These features allow the MVI46-104S module to send a report to the processor without being polled, providing real time data transmission in critical situations.