Specification
PROFIBUS DP Specifications
PROFIBUS DP Cyclic Data: 244 Bytes IN / 244 Bytes OUT
PROFIBUS DP Specifications
Acyclic communication: DPV1 Class 1 Read/Write
Specification: Description
Baud rate: 9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud 1.5 MBaud, 3 MBaud, 6 MBaud, 12 MBaud
Acyclic Read/Writes: 240 Bytes
Hardware Specification
Vibration/Shock: IEC 600068-2-6, 10-150 Hz, ± 0,75 mm, ± 1 g, 1 Octave/min, IEC 600068-2-27, 15 g, 11 ms
Surge: EN 61000-4-5, 2 kV common mode, 1 kV differential mode
Dimensions: Standard 1769 Single-slot module
Power Supply: +5 V ±5 % / 570 mA
Specification: Description
PROFIBUS Interface: RS-485, max. 12 Mbps, potential free, according EN 50170
Max. Distance Rating: 2 slot
Burst: EN 61000-4-4, 2 kV, 5 kHz
PROFIBUS conformance: Certified
Operating Temperature: 0°C to 60°C (32°C to 140°F)
Diagnostic Interface: 10/100 Ethernet, RJ45
Relative Humidity: 5 to 95% (non-condensing)
ESD: EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Radiated/Conducted Immunity: EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1 kHz sine wave, EN 61000-4-6, 10 V, 0,15...30 MHz
Radiated/Conducted Emission: EN 55011 Class A
The ILX69 PROFIBUS Slave module is an in-chassis PROFIBUS DPV1 Slave for CompactLogix, supporting cyclic PROFIBUS I/O data and acyclic messaging. Explicit ladder logic CIP message blocks provide slave status diagnostic data and the ability for acyclic messaging.The ILX69 interface appears to the CompactLogix controller as a standard I/O module allowing it to be configured via Studio/RSLogix™5000. The cyclic PROFIBUS I/O data can be configured in Studio/RSLogix™ 5000, or configuration can be transferred from the Master to the slave module. The Ethernet interface allows for remote diagnostic and troubleshooting. Complete program examples for simple and quick start-up are available.
