Specification
PROFIBUS DP Specifications
Acyclic Data: DPV1
PROFIBUS DP Specifications
Output data: Maximum 5760 Bytes
Input/Output: Maximum 244 Bytes per Slave
Status data: 88 Bytes
Services: Global-Control, Slave-Diagnostic, Set-Parameter
DPV1 services: Class 2 Initiate/Read/Write/Data transport/Abort
Slaves: Maximum 125
DPV1 services: Class 1 Alarm
Baud rate: 9.6 kBaud, 19.2 kBaud, 45.45 kBaud, 93.75 kBaud, 187.5 kBaud, 500 kBaud 1.5 MBaud, 3MBaud, 6 MBaud, 12 MBaud
Input Data: Maximum 5712 Bytes
Sync, Freeze Command: Supported
Specification: Description
Hardware Specification
Radiated/Conducted Immunity: EN 61000-4-3, 10 V/m, 30...1000 MHz, 80% AM, 1kHz sine wave
Vibration/Shock: IEC 600068-2-6, 10-150 Hz, ± 0,75 mm, ± 1 g, 1Octave/min
Radiated/Conducted Emission: EN 55011 Class A
Surge: EN 61000-4-5, 2 kV common mode, 1 kVdifferential mode
Operating Temperature: 0°C to 60°C (32°F to 140°F)
PROFIBUS Interface: RS-485, max. 12 Mbps, potential free, according EN 50170
ESD: EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Specification: Description
Dimensions: Standard 1769 Single-slot module
Diagnostic Interface: 10/100 Ethernet, RJ48
Vibration/Shock: IEC 600068-2-27, 15 g, 11 ms
PROFIBUS conformance: Certified
Radiated/Conducted Immunity: EN 61000-4-6, 10 V, 0,15...30 MHz
Max. Distance Rating: 2 slots
Burst: EN 61000-4-4, 2 kV, 5 kHz
Power Supply: +5 V ±5 % / 570 mA
Relative Humidity: 5 to 95% (non-condensing)
The ILX69-PBM PROFIBUS DPV1 Master module provides all the advantages of in-chassis PROFIBUS communication, such as the inclusion of an AOI and the Autoscan features which greatly reduce your commissioning time, and ComDTM that provides remote Ethernet connectivity with asset management software. With these modules, CompactLogix™ processors can easily communicate with slave devices supporting PROFIBUS DPV0 and DPV1 protocol. The module acts as an input/output module between the PROFIBUS network and the processor supporting complete Master specifications according to IEC 61158.
