Special Features: Ideal solution for applications where Remote I/O connectivity can be used to integrate ASCII serial input devices into a system; Powerful module designed with Slave support, enabling easy connection to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and similar devices).
Standard: ATEX, CE/EMC, Environmental, UL,GOST-R
Environmental Conditions: -20 to 50DEG C Operating, -40 to 85DEG C Storage, 5 to 95 Percent Humidity
Ethernet Port (Ethernet modules only): 10Base-T half duplex RJ45 Connector
Link and Activity LED indicators
Electrical Isolation 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as
specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-
per-second and less than or equal to 5 minutes duration
Dimensions: Standard:
5.20 in H x 2.07 in W x 4.52 in D (13.2 cm x 5.25 cm x 11.48 cm)
Extended:
5.20 in H x 2.73 in W x 4.52 in D
(13.2 cm x 6.934 cm x 11.48 cm)
Storage Temperature: -40° F to 185° F (-40° C to 85° C)
Operating Temperature: -4° F to 122° F (-20° C to 50° C)
Current Load: 500 mA max @ 32 VDC max
Power Supply: 24 VDC nominal
18 to 32 VDC allowed
Positive, Negative, GND Terminals
2.5 mm screwdriver blade
Data Transfer Rate: 57.6, 115, 230
Interface: RS-232, RS-422, RS-485
Ethernet: 10Base-T
Application: Manufacturing, Oil and Gas, Electrical Power and Food Processing.
Type: Stand-alone Gateway
Sub Brand: 5000
Brand Name: PROSOFT
Shipped with Each Unit: Mini-DIN to DB-9M serial cables
4 ft RS-232 configuration cable
2.5mm screwdriver
CD (docs and Configuration utility)
RS-422/485 DB-9 to Screw Terminal Adaptor (1 or 4, depending on ports)
Configuration Serial Port: DB-9M RS-232 only
No hardware handshaking
Relative Humidity: 5% to 95% (with no condensation )
LED Indicators: Power and Module Status
Application Status
Serial Port Activity
Serial Port Error Status
Application Ports: Modbus Plus Connector
Two DB9 Female Standard Modbus Plus connectors
Serial Port Isolation: 2500 V RMS port signal isolation per UL 1577
3000 VDC min. port to ground and port to logic power isolation
Port: 2
Configuration: Yes
Frequency Rating: 50 to 60
Connectivity: Serial
Software Requirements: Drivers
Enclosure: Aluminum
Length: 4.52
Width: 2.07
Height: 5.2
The ProLinx Rockwell Automation Remote I/O to ASCII Generic Serial Gateway creates a powerful connection between devices on a Remote I/O network and ASCII input devices. The module provides one Remote I/O port and up to four ASCII configurable serial ports. The RIO interface is an adapter (slave) which can be connected to a scanner (master) that controls the data transfer. The module also supports limited high speed data transfer via the Input and Output images. The ASCII protocol driver permits the module to interface to many ASCII devices. Each ASCII port on the module is configurable to send and/or receive ASCII strings, each supporting its own individual serial network.
