人物
Alternative to oversized power contacts
Rugged metal construction
Meets requirement for NEMA 1, 4X, 6P and 15 enclosures
Rugged construction
NEMA 6P/IP67 sealing
Each output programmable to N.O. or N.C.
Autobaud
Submersible
Teach and learn angle
Optimized for low energy use
Suitable for machine connectivity and low-voltage circuits
Operating heads are mountable in four positions, 90° apart
Plug-in design
Configurable counters with resets on each output
Pre-wired and factory sealed
Dual outputs with distinct programmable angles to operate
Class I, groups B, C and D or Class II, groups E, F and G or Class III
Class I, Groups B, C, and D or Class II, Groups E, F and G
Front mount for simplified mounting
Programmable travel to reset (hysteresis)
Snap acting contacts
Direct opening action
Connect directly to PLC input
Proven reliability
Alternative to glass-enclosed reed switches or solid state devices
Corrosion resistant
NEMA Enclosure Type 13
Multiple operator styles available:
High contact reliability in contaminated atmospheres
Multiple operator styles
Long life and reliability
Direct connection to DeviceNet® network
NEMA Type 4 watertight construction
规格
Operating Lever Data
Roller Width: 0.25 In
Operating Lever Data
Radius: 1.44 In
Roller Position: Roller On Front
Adjustable or Non-Adjustable: Non-Adjustable
Roller Diameter: 0.75 In
Roller Material: Steel
Lever Type: Offset Roller Lever
Additional Information
Message: Operating Lever 802T-W3F Should Not Be Used With 802M-NPY5 or 802M-ASY5 Switches.
Message: Do Not Use 802T-W7, 802T-W7A, 802T-W7B On Maintained Contact Limit Switches.
802T Limit Switch Levers, Offset Roller Lever, 1.44 in. Lever Length, Steel Roller, 0.75 in. Roller Diameter, 0.25 in. Roller Width
