规格
EtherNet/IP Specifications
Class 3 Client Connections: Unconnected - 1
EtherNet/IP Specifications
Command List: Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.
Supported PLC Types: PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Max RPI time: 5 ms per connection
Command Sets: PLC5 ASCII Command Set
Command Sets: PLC5 Binary Command Set
Number of Class 1 I/O Connections: 8
Number of Class 3 Server Connections: 5
Class 3 Client Connections: Connected - 2
CIP Services Supported: 0x4D - CIP Data Table Write
Supported Message Types: PCCC and CIP
Command Sets: PLC-2/PLC-3/PLC5 Basic Command Set
CIP Services Supported: 0x4C - CIP Data Table Read
Command Sets: SLC500 Command Set
I/O connection sizes in/out: 496/496 bytes
PROFINET Specifications
Driver Type: Class A Device
PROFINET I/O Data: 1440 bytes IN, 1440 bytes OUT
Exchange Types: Cyclic Real-time (RT) and Acyclic Data
Environmental
Shipped With Each Unit: 2.5 mm screwdriver
Ethernet Ports (2): 10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991
Dimensions (H x W x D): 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm
Relative Humidity: 5% to 95% RH with no condensation
Current Load: 24 VDC nominal @ 300 mA
Ethernet Ports (2): Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
Current Load: 10 to 36 VDC @ 610 mA maximum
Power Supply: 24 VDC nominal
Storage Temperature: -40°C to 80°C (-40°F to 176°F)
Power Supply: Positive, Negative, GND Terminals
Shipped With Each Unit: ProSoft Solutions DVD
Shipped With Each Unit: 5’ straight-through Ethernet cable
Shock: IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operation)
Operating Temperature: -25°C to 70°C (-13°F to 158°F)
Shock: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
Shipped With Each Unit: J180 Power Connector
Power Supply: 10 to 36 VDC allowed
Vibration: IEC 60068-2-6; 5G @ 10Hz to 150Hz
ProSoft Technology的以太網 / IP™到Modbus®TCP/ IP通信網關允許RockwellAutomation®PAC和SchneiderElectric®PAC之間的高速雙向數據傳輸。我們的Modbus®TCP/ IP驅動程序具有多種客戶端和服務器功能，可實現更快的數據傳輸。兩個獨立的以太網端口允許每個協議駐留在不同的子網上，允許您在兩個子網之間傳遞數據，而無需更改每個設備的IP地址。此外，網關還包括嵌入式EDS附加配置文件，可簡化集成並縮短調試時間。
