规格

Relative Humidity: 5% to 95% RH with no condensation
Shipped With Each Unit: ProSoft Solutions DVD
Shipped With Each Unit: 2.5 mm screwdriver
Ethernet Port: 10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency is less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
Current Load: 24 VDC nominal @ 300 mA
Dimensions (H x W x D): 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm
Shock: IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
Power Supply: Positive, Negative, GND Terminals
Shipped With Each Unit: 5’ straight-through Ethernet cable
Storage Temperature: -40°C to 80°C (-40°F to 176°F)
Shock: IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
Power Supply: 24 VDC nominal
LED Indicators: Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), Module Configuration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit
Shipped With Each Unit: J180 Power Connector
Current Load: 10 to 36 VDC @ 610 mA maximum
Power Supply: 10 to 36 VDC allowed
Operating Temperature: -25°C to 70°C (-13°F to 158°F)
Vibration: IEC 60068-2-6; 5G @ 10 to 150 Hz

Siemens Industrial Ethernet Specifications

Supported Register Types: DB, Inputs, Outputs, Flags, Counters, Timers
Supported Clients: 20
Supported PLC Data Exchange (Read and Write): Siemens S7-200, Siemens S7-300, Siemens S7-400, Siemens S7-1200

EtherNet/IP Specifications

Supported Message Types: PCCC and CIP
Number of Class 3 Server Connections: 5
CIP Services Supported: 0x4D - CIP Data Table Write
Number of Class 1 I/O Connections: 2
Command Sets: PLC5 ASCII Command Set
Command Sets: PLC-2/PLC-3/PLC5 Basic Command Set
Command Sets: SLC500 Command Set
Command Sets: PLC5 Binary Command Set
CIP Services Supported: 0x4C - CIP Data Table Read
Class 3 Client Connections: Unconnected - 1
I/O connection sizes: 248/248
Class 3 Client Connections: Connected - 2
Max RPI time: 5 ms per connection
Supported PLC Types: PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Command List: Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.