Storage Temperature: -40° F to 185° F (-40° C to 85° C)
LED Indicators: Module status
Backplane transfer status
应用 status
Serial activity and error LED status
Configuration Serial port (PRT1): Mini-DIN
RS-232
Hardware handshaking
Dimensions (with Module installed in Base): Height x Width x Depth
3 in. x 3.7 in. x 2.7 in.
94 mm x 94 mm x 69 mm
Form Factor: Single Slot 1794 Backplane compatible
Locate in any slot of Backplane
BackPlane Current Load: 20 mA @ 5 VDC
Shock: 30 g operational
50 g non-operational
应用 serial Port (PRT2): Mini-DIN
RS-232/422/485 jumper selectable
500 V optical isolation from backplane
Vibration: 5 g from 10 to 150 Hz
Relative Humidity: 5% to 95% (without condensation)
External 电源: 12 VDC to 24 VDC
340 mA to 170 mA
运行温度: 32° F to 131° F (0° C to 55° C)
特性: Operation via Simple Ladder Logic, Flex Backplane 界面 via I/O Access
应用: RTU-IED Communication, Water/Wastewater and Oil and Gas Industries
界面: RS-232, RS-422, RS-485
Port: 2
Processor: FLEX
Data Transfer Rate: 110 to 115200
Configuration: Yes
Width: 3.70
Height: 3.70
周围条件: 0 to 60DEG C Operating, -40 to 85DEG C Storage, 5 to 95 Percent Relative Humidity
商标名称: PROSOFT
子品牌: inRAx
分类: Master/Slave Communication 界面 Module
Connectivity: Serial
Protocol: DNP 3.0
Length: 2.70
The MVI94 DNP 3.0 Master/Slave
Communication Module is a single slot, backplane compatible DNP 3.0 interface solution for the Rockwell Automation Flex platform. This module provides highly configurable support of both DNP 3.0 Master and Slave implementations (level 2 minimum), allowing the many SCADA and field devices supporting the DNP protocol to be integrated into the powerful Flex platform.
