Processor: Compatible with Rockwell Automation SLC 5/02 M0/M1 capable processors or newer
Ethernet Port (Ethernet modules): RJ45 Connector
Link and activity LED indicators
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 seconds, applied as
specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-
per-second and less than or equal to 5 minutes duration
Relative Humidity: 5% to 95% (without condensation)
Shock: 30 g operational, 50 g non-operational
Vibration: 5 g from 10 to 150 Hz
LED Indicators: Module status, Backplane transfer status, 应用 status, Serial activity
(debug port), Ethernet link and activity, and error LED status
CFG Port (CFG): RJ45 (DB-9M with supplied cable)
RS-232 only
No hardware handshaking
Configuration Connector: RJ45 RS‑232 Connector (RJ45 to DB-9 cable shipped with unit)
BackPlane Current Load: 800 mA @ 5.1 VDC
运行温度: 32° F to 140° F (0° C to 60° C)
Storage Temperature: -40° F to 185° F (-40° C to 85° C)
特性: Acts as an input/output module between the IEC-870-5-104 Ethernet network and the SLC backplane. Data transfer between the module and the processor is asynchronous from the actions on the network. databases are defined by the user for themodule to hold data as required by the protocol. Single Slot – 1746 backplane compatible (Local or extended I/O rack only. Remote rack not supported). The module is recognized as an Input/Output module and has access to processor 内存 for data transfer between processor and module using M0/M1 files. Ladder Logic is used for data transfer between module and processor. Sample ladder file includedConfiguration data obtained from configuration text file downloaded to module.
应用: Power and Distribution, Petrochemical, Water treatment, Oil and Gas Production
Standard: CE Mark; GOST-R; Korean KC Registration; UL/cUL; Class1. Div 2; UL/cUL; Class1, Div 2
_Ethernet: 10/100 Base-T
商标名称: PROSOFT
子品牌: MV46
分类: Communication Module
MVI46 IEC 60870-5-103主網絡接口模塊允許SLC處理器與IEC 60870-5-103從設備輕鬆連接。 MVI46-103M模塊可與SLC處理器連接多達32個串行通信設備。模塊上的兩個通信端口充當控制設備（主設備），以與其自己網絡上的受控設備連接。每個端口都是可單獨配置的。對於許多與IEC兼容設備必須與SLC平台通信的應用，MVI46-103M是理想的解決方案。兼容設備包括繼電器，斷路器，子站通信模塊和其他串行通信設備。 IEC協議的功能與DNP 3.0協議非常相似，後者俱有時間戳和異常真實報告（TRBE）。這些功能允許MVI46-103M模塊在不輪詢的情況下向處理器發送報告，在關鍵情況下提供實時數據傳輸。
