规格

Transfer Lists: Create data exchange lists using source and destination Tags
Interfaces: Choose RA, Modbus TCP/IP, or Siemens IE protocol for each Interface
Internal Date and Time: Can be set manually or synchronized with ControlLogix or CompactLogix. The frequency of synchronization can be: No frequency, Hourly, Daily, Every 8 hours, or Every 12 hours.
Protocols Supported: Modbus TCP/IP and Siemens Industrial Ethernet supported via the built-in Ethernet ports. EtherNet/IP, ControlNet, Data Highway+ (DH+) and Data Highway 485 (DH485) are supported through Rockwell Automation (RA) 1756 communications bridge modules.
Tags: Browse and use tag names from any RA PAC in a ControlLogix local or remote chassis or any Allen-Bradley PLC or RA PAC connected across supported bridged networks. Create user-defined Tags for Modbus and Siemens data addresses.
Triggers: Define events that will cause one or more Transfer Lists to be executed. Triggers can be based on Tag values or scheduled time intervals.
Configuration Utility: Contains built-in Help functions. On-Line configuration only
Setup Mode: Setup Mode temporarily sets the Message Manager network port settings to their default values. Setup Mode also allows you to reset the default administrative password.
Configuration Data: Can be saved offline or saved to the on board compact flash card.
Data Transfers: Transfer data between up to 16 individually-configurable communications Interface connections
Security: No login required to view configuration information. Must log in to make configuration changes. PROJECT-level users may make configuration changes and start/stop data transfer operations (i.e. switch between RUN and IDLE). ADMINISTRATOR-level users may make Project -level changes as well as assign usernames, passwords, and security access levels for all users.