规格
Radio
Receiving Sensitivity: -110 dBm @ 9600 bps, -100 dBm @ 115.2 kbps, or -100 dBm @ 250 kbps
Radio
Specification: Description
Antenna Connector: MMCX
Range (Peer-to-Peer): 900 MHz: Up to 30 Miles (48.3 Km), 868 MHz and 2.4 GHz: Up to 5 Miles (8 Km)
Frequency: 863 to 870 MHz (Europe) / 902 to 928 MHz (North Am) / 915 to 928 MHz (Aus, Int'l) / 2.4 GHz (US/Int'l)
Type: 900 MHz / 2.4 GHz: ISM Band, FSK (Frequency-Shift Keying), AES Encryption 256-bit (900 MHz), 128-bit (915 MHz) -900 MHz: FHSS (Frequency Hopping Spread Spectrum) / 50 Freq Ch x 10 Hopping Tables -Channel Size: 500 KHz for 1 W Radio -2.4 GHz: DSSS (Direct-Sequence Spread Spectrum), AES Encryption 128-bit -Channel Size: 5 MHz, Utilizes 12 out of 802.15.4 Standard 16 Channels
Bit Rate: 868 MHz and 900 MHz: 9600 bps / 115.2 kbps, 2.4 GHz: 250 kbps, 900 MHz: 1 mW to 1 W, 2.4 GHz: 10 mW to 63 mW
Hardware & System
Self-Diagnostics: Contains Comprehensive Self-Checking Software and Hardware for continuous Monitoring of Operation
Serial Interfaces: RTU Port (RS232/RS485 Modbus Master or Slave) Terminal Block
Device Functionality: Multipoint Wireless I/O Gateway
Configuration: Mini-USB to Serial
Specification: Description
Embedded Controller: 32-bit Low Power ARM7 Microcontroller with Internal FLASH (Field Upgradeable)
Physical
Country of Origin: Made in USA
Power Consumption: Idle: 100 mA, Configuration: 110 mA, Transmission: 350 mA
Package Dimensions (W x H x D): 5.5 x 10.1 x 2.8 in, 140 x 257 x 72 mm
Weight: Net: 0.3 lbs / 136 g; Packaging: 0.8 lbs / 363 kg
Average Power Input: 2 Watt
DC Power Input: 9 to 30 VDC
Mounting Hardware: Requires DataRail™ and 35 mm DIN Rail
Warranty: 2-Year Parts and Labor
Dimensions (W x H x D): 0.7 x 3.9 x 4.5 in, 17.5 x 99 x 114 mm
Operating Conditions: Temperature: Class I; Div 2: -40 °F to 176 °F (-40 °C to 80 °C) -Ambient: -4 °F to 176 °F (-20 °C to 80 °C)-Humidity: 0 to 99 %, Non-Condensing
Specification: Description
ProSoft Technology’s Multi-Point Wireless I/O system allows you to monitor I/O from multiple locations without running long wires. This secure, reliable system is scalable and deploys quickly, allowing you to skip trenching, conduit, and permits. Three module types: Analog 0-10 V, Analog 4-20 mA, and Digital/Discrete – give you the freedom to customize your setup based on your environment and needs. The system can be used in different methods: I/O to I/O, I/O to Modbus serial communications, and Modbus® serial to Modbus Serial communications. This peer-to-peer system can move data from the I/O or Modbus devices to any other node. The digital input module can act as a counter and send the accumulated value to another location.
