规格
Radio
Antenna Connector Type: SMA (Female Connector)
Radio
RF Security: 128-bit AES
Default Transmit Speed / Update: 1 Second
Frequency: 863-870 MHz or 2.4 GHz License-Free ISM Band
Outdoor / Line of Sight Max Range (900MHz@250mW/2.4GHz@63mW): 900 MHz: 4 Miles (6.4 Km) / 2.4 GHz: 5.7 Mile (9.2 Km) / 2.4 GHz @10mW: 2500 ft (750 m)
Indoor / Urban Max Range (900MHz@250mW/2.4GHz@63mW): 900 MHz: 1000 ft (305 m) / 2.4 GHz: 300 ft (90 m) / 2.4 GHz International: 200 ft (60 m)
Receiver Sensitivity: 868 - 900 MHz: -101 dBm / 2.4 GHz: -100 dBm
Spread Spectrum: 868 - 900 MHz: FHSS / 2.4 GHz DSSS
Turbo Tx Speed Based on Number of I/O Modules: 1=100 ms, 2-3=200 ms, 4=250 ms, 5-6=333 ms, 7-11=500 ms, 12-16=1 second
Specification: Description
Maximum Transmit Power (Adjustable by Software): 868 MHz: 14dBm (25 mW) / 2.4 GHz:18 dBm (63 mW) / 2.4 GHz International: 10 dBm (10 mW)
Hardware & System
DataRail Mounting Hardware: 4-Claw attachment to 35 mm DIN Rail with end terminal bracket
Warranty: 2-Year limited
Wire Gauge: Solid / Stranded (AWG) 28-12 gauge
DIN Rail Mounting Compatibility: 35 mm x 7.5 mm DIN Rail
Wire Rating: UL: 300 V RMS, 80 °C and 300 V, 105 °CCSA: 300 V RMS, 105 °C
Maximum Network Capacity²: Max capacity depends on I/O combinationUse power budget calculator http://goo.gl/t67r3k
Specification: Description
Built-In Mounting Hardware: Spring-loaded clip-on system
DataRail™ (Included with Radio Kit): 6.1 in / 156 mm - Supports up five (5) I/O modules, other lengths also available
Physical
Net Weight (Single Radio): 0.3 lbs / 136 g
RF Link Diagnostics (Left LED): Green = RF Traffic / Yellow = RF Link Fail
I/O Link Diagnostics (Right LED): Green = I/O OK, Modules Detected / Red = I/O Link Fail
RF Link Alarm Digital Output: 10-Second RF Timeout Trigger (NPN) - User Selectable
Reverse Polarity Protection: Yes
I/O Link Alarm Digital Output: I/O Mismatch, Bus or Module Failure (NPN)
Power Consumption: 35 mA @ 12V AVG (10% Duty Cycle)
Net Dimensions: 0.7 x 3.9 x 4.5 in / 17.5 x 99 x 114 mm
Supply Voltage Range: 9 to 30 VDC (± 5 %)
Advanced User Interface Features: Test RSSI, Tx Power Adjustment, Force Local Output(s),Set FailSafe Parameters, and Additional Diagnostics
Specification: Description
Kit Packaging Weight: 1.3 lbs / 590 g
Kit Packaging Dimensions (WxHxD): 5.5 x 10.1 x 2.8 in / 140 x 257 x 72 mm
How many times do you need to get a few points of digital or analog inputs and outputs from point A to point B, but just can’t justify the cost of running the wires? The Radio Kit is a replacement for hardwired I/O that is simple to deploy. The Kit requires no programming to set up – just wire strippers and a screwdriver. There is no communication protocol to interpret.The radios are paired and secured at the factory, so there are no settings or configurations to figure out. It is bi-directional, so digital and analog signals can be sent in both directions between two connected I/O stations. Inputs on one module are simply replicated as outputs on the corresponding module. Our wireless I/O makes use of the unlicensed ISM band at either 868 MHz, 900 MHz, or 2.4 GHz, with both US and International versions available. The radios can send I/O up to 4 miles for the 868 MHz and 2.4 GHz models. Each radio pair can connect up to 16 I/O modules, more than enough for most applications.
