Porta ethernet (Modulos ethernet only): 10Base-T half duplex RJ45 ConectOu
Link e Activity IndicadOues LED
Electrical Isolamento 1500 V RMS at 50 Hz to 60 Hz fOu 60 s, applied as
specified in section 5.3.2 De IEC 60950: 1991
Ethernet Broadcast StOum Resiliency = less than Ou equal to 5000 [ARP] frames-
per-second e less than Ou equal to 5 minutes duration
Fonte de Alimentação: 24 Vcc nominal
18 to 32 Vcc allowed
Positive, Negative, GND Terminals
2.5 mm screwdriver blade
Características especiais: Ideal solution for applications where Modbus Plus Conectividade can be used to integrate DF1 Dispositivos into a system; Powerful Módulo designed com Server support, enabling easy Conexão to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, e similar Dispositivos).
Aplicação: Manufacturing, Oil e Gas, Electrical potência e Food Processing.
Condições ambientais: -20 to 50DEG C Operating, -40 to 85DEG C Armazenamento, 5 to 95 % Humidade
Aplicação Portas: Modbus Plus Conector
Two DB9 Fêmea Padrão Modbus Plus Conectores
Indicadores LED: potência e Módulo Status
Aplicação Status
Porta serial Activity
Porta serial Estado de erro
Dimensões: Padrão:
5.20 in H x 2.07 in W x 4.52 in D (13.2 cm x 5.25 cm x 11.48 cm)
Estendido:
5.20 in H x 2.73 in W x 4.52 in D
(13.2 cm x 6.934 cm x 11.48 cm)
Humidade relativa: 5% to 95% (sem condensação )
Temperatura de armazenamento: -40° F to 185° F (-40° C to 85° C)
Temperatura de operação: -4° F to 122° F (-20° C to 50° C)
Current Load: 500 mA max @ 32 Vcc max
Port: 2
Interface: RS-232, RS-422, RS-485
Ethernet: 10Base-T
Padrão: ATEX, CE/EMC, Environmental, UL,GOST-R
Tipo: Stand-alone Gateway
Sub-Categoria: 5000
Marca: PROSOFT
Configuração Porta serial: DB-9M RS-232 only
No hardware handshaking
Porta serial Isolamento: 2500 V RMS port Sinal Isolamento per UL 1577
3000 Vcc min. port to ground e port to logic potência Isolamento
Shipped com Each Unit: Mini-DIN to DB-9M serial cables
4 ft RS-232 Configuração cable
2.5mm Parafusodriver
CD (docs e Configuração utility)
RS-422/485 DB-9 to Parafuso Terminal AdaptOu (1 Ou 4, depending on POutas)
Configuração: Yes
Classificação de frequência: 50 to 60
Conectividade: Serial
Protocol: MBP, DF1
Software Requirements: Drivers
Invólucro: Aluminum
Comprimento: 4.52
Tamanho: 2.07
Peso: 5.2
The ProLinx Modbus Plus to DF1 Master/Slave Gateway creates a powerful connection between devices on a Modbus Plus network and DF1 Slave devices. This stand-alone DIN-rail mounted protocol gateway provides one Modbus Plus configurable DB-9F port and up to four configurable serial ports. The Modbus Plus protocol driver supports both Master and Slave implementations of the protocol on the DB9 Female Modbus Plus port. The Modbus Plus port is fully configurable. The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable.
