Características especiais: Ideal solution for the many applications where DNP over Ethernet Conectividade can be used to integrate a PROFIBUS DP master device into a system. The DNP over Ethernet gateway InSight a potênciaful Módulo designed com both Client e Server support, enabling easy Conexão to Outros DNP Dispositivos. In combination com the PROFIBUS DP Slave support, the Módulo provides a very potênciaful interface to the many PROFIBUS master Dispositivos which are in use in the industrial marketplace today. Applications for the Módulo are found in most industries, especially the Manufacturing, Oil e Gas, Electrical potência e Food Processing.
Fonte de Alimentação: 24 Vcc nominal
18 to 32 Vcc allowed
Positive, Negative, GND Terminals
2.5 mm screwdriver blade
Current Load: 500 mA max @ 32 Vcc max
Temperatura de operação: -4° F to 122° F (-20° C to 50° C)
Temperatura de armazenamento: -40° F to 185° F (-40° C to 85° C)
Humidade relativa: 5% to 95% (sem condensação )
Dimensões: Padrão:
5.20 in H x 2.07 in W x 4.52 in D (13.2 cm x 5.25 cm x 11.48 cm)
Estendido:
5.20 in H x 2.73 in W x 4.52 in D
(13.2 cm x 6.934 cm x 11.48 cm)
Indicadores LED: potência e Módulo Status
Aplicação Status
Porta serial Activity
Porta serial Estado de erro
Configuração Porta serial: DB-9M RS-232 only
No hardware handshaking
Porta ethernet (Modulos ethernet only): 10Base-T half duplex RJ45 ConectOu
Link e Activity IndicadOues LED
Electrical Isolamento 1500 V RMS at 50 Hz to 60 Hz fOu 60 s, applied as
specified in section 5.3.2 De IEC 60950: 1991
Ethernet Broadcast StOum Resiliency = less than Ou equal to 5000 [ARP] frames-
per-second e less than Ou equal to 5 minutes duration
Aplicação Portas: Modbus Plus Conector
Two DB9 Fêmea Padrão Modbus Plus Conectores
Porta serial Isolamento: 2500 V RMS port Sinal Isolamento per UL 1577
3000 Vcc min. port to ground e port to logic potência Isolamento
Shipped com Each Unit: Mini-DIN to DB-9M serial cables
4 ft RS-232 Configuração cable
2.5mm Parafusodriver
CD (docs e Configuração utility)
RS-422/485 DB-9 to Parafuso Terminal AdaptOu (1 Ou 4, depending on POutas)
Sub-Categoria: 5000
Tipo: Stand-alone Gateway
Aplicação: Manufacturing, Oil e Gas, Electrical potência e Food Processing.
Padrão: ATEX, CE/EMC, Environmental, UL,GOST-R
Ethernet: 10Base-T
Interface: RS-232, RS-422, RS-485
Port: 2
Conectividade: Serial
Protocol: PDPS, TCP, UDP
Software Requirements: Drivers
Invólucro: Aluminum
Peso: 5.2
Marca: PROSOFT
Data Transfer Rate: 9.6KBPS to 12MBPS
Configuração: Yes
Classificação de frequência: 50 to 60
Comprimento: 4.52
Tamanho: 2.07
Condições ambientais: -20 to 50DEG C Operating, -40 to 85DEG C Armazenamento, 5 to 95 % Humidade
The ProLinx DNP over Ethernet to PROFIBUS DP Slave Gateway creates a powerful connection between devices on a DNP over Ethernet network and a PROFIBUS master device. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and one PROFIBUS DP Slave configurable DB9F port. The ProLinx module supports the DNP 3.0 protocol as a server using the TCP and UDP protocols using service port 20000. This port is fully configurable. The PROFIBUS DP Slave protocol driver supports the PROFIBUS V0 Slave implementation, providing powerful data transfer capability between the ProLinx module and Siemens PLCs or other hosts. User configurable data mapping and DP port operation make the interface an easy to use and powerful data transfer tool.
