Porta ethernet (Modulos ethernet only): 10Base-T half duplex RJ45 ConectOu
Link e Activity IndicadOues LED
Electrical Isolamento 1500 V RMS at 50 Hz to 60 Hz fOu 60 s, applied as
specified in section 5.3.2 De IEC 60950: 1991
Ethernet Broadcast StOum Resiliency = less than Ou equal to 5000 [ARP] frames-
per-second e less than Ou equal to 5 minutes duration
Marca: PROSOFT
Ethernet: 10Base-T
Padrão: ATEX, CE/EMC, Environmental, UL,GOST-R
Aplicação: Manufacturing, Oil e Gas, Electrical potência e Food Processing.
Características especiais: Ideal solution for joining Modbus TCP/IP e DNP over Ethernet networks; Powerful Módulo designed com both Client e Server support for Modbus/TCP e Server support for DNP over Ethernet, enabling easy connections between the dissimilar network types.
Tipo: Stand-alone Gateway
Sub-Categoria: 5000
Shipped com Each Unit: Mini-DIN to DB-9M serial cables
4 ft RS-232 Configuração cable
2.5mm Parafusodriver
CD (docs e Configuração utility)
RS-422/485 DB-9 to Parafuso Terminal AdaptOu (1 Ou 4, depending on POutas)
Porta serial Isolamento: 2500 V RMS port Sinal Isolamento per UL 1577
3000 Vcc min. port to ground e port to logic potência Isolamento
Aplicação Portas: Modbus Plus Conector
Two DB9 Fêmea Padrão Modbus Plus Conectores
Configuração Porta serial: DB-9M RS-232 only
No hardware handshaking
Indicadores LED: potência e Módulo Status
Aplicação Status
Porta serial Activity
Porta serial Estado de erro
Dimensões: Padrão:
5.20 in H x 2.07 in W x 4.52 in D (13.2 cm x 5.25 cm x 11.48 cm)
Estendido:
5.20 in H x 2.73 in W x 4.52 in D
(13.2 cm x 6.934 cm x 11.48 cm)
Humidade relativa: 5% to 95% (sem condensação )
Temperatura de armazenamento: -40° F to 185° F (-40° C to 85° C)
Temperatura de operação: -4° F to 122° F (-20° C to 50° C)
Current Load: 500 mA max @ 32 Vcc max
Fonte de Alimentação: 24 Vcc nominal
18 to 32 Vcc allowed
Positive, Negative, GND Terminals
2.5 mm screwdriver blade
Condições ambientais: -20 to 50DEG C Operating, -40 to 85DEG C Armazenamento, 5 to 95 % Humidade
Peso: 5.2
Tamanho: 2.07
Comprimento: 4.52
Invólucro: Aluminum
Software Requirements: Drivers
Protocol: TCP, UDP, DNP 3.0
Conectividade: Serial
Interface: RS-232, RS-422, RS-485
Port: 1
Data Transfer Rate: 110 to 115
Classificação de frequência: 50 to 60
Configuração: Yes
The ProLinx Modbus TCP/IP to DNP over Ethernet Gateway creates a powerful connection between devices on Modbus TCP/IP and DNP over Ethernet networks. This stand-alone DIN-rail mounted protocol gateway provides one Ethernet port. The Modbus TCP/IP protocol driver can interface many different protocols into Schneider Electric Quantum processors as well other solutions supporting the protocol. The MNET driver supports Client and Server connections, and when coupled with the Web option provides a web/ftp interface as well. The ProLinx module supports the DNP 3.0 protocol as a server using the TCP and UDP protocols using service port 20000. This port is fully configurable.
