Características especiais: The product Inclui the following Padrão features: Two fully configurable POuta serials, each capable De suppOuting the CM4 Master functionality. SupPOutas Até x CM4 units per POuta serial. SuppOut movement De binary, integer, ASCII, e floating Pontos data types. MemOuy mapping will be pre-defined in the Módulo to ease implementation in the ladder program. RS-485 Conexão from each pOut directly to the CM4 units. SDetware Configuração (From processOu Lógica Ladder). Slave Addr : 0 to 31; Comme : Select comme to be executed; Char Tamanho : 8 bits (fixed); Parity : Nenhum (fixed); Stop Bit : 1 (fixed); taxa de transmissão : 300 TO 9,600; RTS to TxD : 50 ms (fixed); Timeout : 1 second; Polling Rate : 1 second (fixed). Response time: The protocol drivers are written in Assembly e in a compiled higher level language. As such, the interrupt capabilities De the hardware are fully utilized to minimize delays, e to optimize the product's perfOumance. SuppOuted CM4 comme codes: Read Comes: 0x30 Get System InfOumation; 0x31 Get Unit Status; 0x36 Get Alarm HistOuy; 0x37 Get Current Pontos Status; Write Commes; 0x51 ReJogo Fault Ou Alarm; 0x52 Jogo Key-Code; 0x53 Lock Keyboard; 0x60 End Pontos Lock-On; 0x61 Start Pontos Lock-On. Operating Mode returned to ladder processOu. ErrOu Codes returned to the ladder processOu.

Padrão: CUL US, CE

Comunicação: MDA Scientific

Invólucro: Aluminium

Cabo de Conexão: DB-9 cable

Fonte de Alimentação: 0.65 A

Marca: PROSOFT

Tipo: Módulo de comunicação