BackPlane Current Load: 800 mA @ 5.1 VDC
Operating Temperature: 32° F to 140° F (0° C to 60° C)
Storage Temperature: -40° F to 185° F (-40° C to 85° C)
Relative Humidity: 5% to 95% (without condensation)
Shock: 30 g operational, 50 g non-operational
Ethernet Port (Ethernet modules): RJ45 Connector
Link and activity LED indicators
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 seconds, applied as
specified in section 5.3.2 of IEC 60950: 1991
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-
per-second and less than or equal to 5 minutes duration
Vibration: 5 g from 10 to 150 Hz
Processor: Compatible with Rockwell Automation SLC 5/02 M0/M1 capable processors or newer
LED Indicators: Module status, Backplane transfer status, Application status, Serial activity
(debug port), Ethernet link and activity, and error LED status
CFG Port (CFG): RJ45 (DB-9M with supplied cable)
RS-232 only
No hardware handshaking
Configuration Connector: RJ45 RS‑232 Connector (RJ45 to DB-9 cable shipped with unit)
Brand Name: PROSOFT
Sub Brand: MV46
Type: Communication Module
Standard: CE Mark; GOST-R; Korean KC Registration; UL/cUL; Class1. Div 2; UL/cUL; Class1, Div 2
Special Features: Single slot, backplane compatible solution for the Rockwell Automation SLC platform. This module is a powerful and programmable solution supporting two fully isolated serial ports and one Ethernet port allowing the many field devices to be integrated into the SLC platform with custom user written 'C' code and various APIs supplied for Ethernet, serial and backplane communication. Has three serial and one Ethernet port, two of the serial ports are isolated for field interfaces.
Application: Bar Code Scanner Interface, Legacy ASCII Protocol Connections, Terminal Port Emulation, Printer Driver
_Ethernet: 10/100 Base-T
The MVI46 Application Development Ethernet Communication Module is an SLC backplane compatible module that allows SLC processors to interface easily with Ethernet protocol compatible devices and hosts utilizing custom 'C' code.
